8 |
P a g e
6.
With top securely
fastened to base, set granite
sections into place, polished
side up.
4.
With top centered on
base and one hole
approximately centered on
each corner of the base,
insert a mounting clip into
mounting hole
(refer to image at right.)
5.
Insert one of the
included screws through the
hole in the mounting clip
and screw into the table
base. Do not over-tighten as
this may cause stripping.
If stripping occurs, rotate
the top approximately 1”
and re-insert all screws.
Unused screw
hole
7
. Gently lower your crystal fire burner into the burner
cutout and continue to the page 14 for gas hookup and
igniter hookup instructions.
Summary of Contents for CM-48-DIN-K
Page 19: ...19 P a g e ...
Page 20: ...20 P a g e 2014 The Outdoor GreatRoom Company ...
