21
20
SMTP/FTP Picture Size
Pictures sent via SMTP and FTP are optional in size as either 640*480, or 1920*1440. The small size images are approx. 30-40KB
and the large are about 300-400KB. Full sized images are still stored on the SD card.
Note:
1) camera will only send photos to preset phone numbers via MMS;
2) camera will only send photos to preset email(s) via MMS if SMTP is not configured;
3) camera will only send photos to preset email accounts via SMTP (GPRS) if SMTP is set.
Max Num/Day
Default: unlimited;
Optional: 1~99
i.e.: User chooses 50, then the cameras will only send 50 pics every day. All the other images will only be stored on the SD card.
SMS Ctrl
1) By Trigger:
(Best for AA battery power)
The camera will only be able to change & save settings sent to it remotely (via App) when the camera is triggered to shoot
photos/videos. The camera (and GPRS module) sits dormant until it is triggered by movement or the next scheduled time lapse
image. When it wakes up it downloads any messages previously sent and then processes them. If the camera has been turned
off remotely it automatically checks every hour for a message to turn back on.
2) All the Time:
(Only use when power adapter is connected as this option will consume 25 times the amount of
battery power.)
Camera GPRS module is on stand-by all the time; so the camera settings can be changed and saved whenever you send the
remote SMS setting commands.
Daily Report
1) OFF;
2) ON; Choose ON to set up the time when you want the camera to send you the Daily Report;
Contents of the Daily Report: Device IMEI Number, CSQ (Signal Strength): 0~31, Camera ID, Temperature, Date & Time, Battery
Life, SD Card Info, Total Pics Taken by Cam, Pics Sent by Cam
The “Other” Tab
Settings
Programmable Options
Language
English…
Date/Time
Month : date : year; hour : minute : second
Note: Please adjust camera date/time to ensure some functions work as expected.
Stamp
Imprints of programmed camera ID, moon phase, temperature, date, and time on photo
Battery Type
Alkaline/ NI-MH
Adjust to your battery type. If you are using Lithium batteries select NiMH.
Frequency
50HZ, 60HZ; improper setting may cause camera screen flicker. This is rarely required to be changed.
SD Cycle
When ON the camera will save images over the top of old images when the SD card is full. If set to OFF
the camera will stop taking images when the SD card is full.
Reset
Select “Yes” to reset camera back to factory default settings.
Password
Select “ON”, press “OK”, to enable password protection for your camera. The camera supports passwords
up to 6 digits/letters long. When you start your camera you will be required to enter this. If you forget
this password you will have to send it back to us to have this fixed.
About
Firmware version in camera (Version: / IMEI: / MCU:)
