CTC162009-1(076-5456-6)
ASSEMBLY INSTRUCTIONS
Step 1: Verify package contents
Tent : 1 each
Step 4: Secure main and side poles
1) With a person holding each end of a main pole (A) flex the pole into an arch. Carefully place
the ends onto the pins located at the stake loops.
2) Repeat this step for the other main tent pole (A) and side tent poles (B).
Step 3: Spread tent and insert poles
1) Spread out the tent flat, floor-side down.
2) Insert main poles (A) through the sleeves so the poles cross at top of the tent.
3) Insert side poles (B) through the sleeves, at the sides of the tent.
Step 2: Assemble poles
1) Assemble the tent poles by placing
fibreglass sections into the metal ferrules.
Five poles are provided.
(A) Main - 2 each(Black)
(B) Side - 2 each(Gray)
(C) Fly - 1 each
Rainfly : 1 each
IMPORTANT NOTES:
* Assemble before camping to become familiar
with the assembly.
* Two people are recommended for set-up.
* Select a clean, level area for the campsite, free
of debris and sharp objects, away from a
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of a tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam seal the inside stitched seams. This will
improve weather resistance. Available in
sporting goods departments. Discolouration
may occur if applied to outside seams.
A
B
A
B
CTC 162009-1 05/15
Fibreglass Pole : 5 each (total)
Tent Stakes : 15 each
(A) Main 2 each
(B)
2 each Side
(C)
1 each Fly
