Step 5: Stake the tent
1) Stake down the tent by inserting a stake
through the stake loops, located along
the perimeter of the tent.
2) Make certain the tent floor is pulled out
evenly and tightly.
3) Hammer the stakes into the ground at a
45
0
angle using a hammer or mallet.
Step 6: Attach fly
1) Unfold the fly and place over the tent positioning the logo over the doorway.
2) Attach the fly to the tent wrapping the Velcro® fasteners sewn on the underside of the fly around the tent frame.
3) Secure fly by hooking the plastic s-hook on the fly corners to the fast feet at the tent corners.
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper function.
Tent appears as shown
Step 7: Secure guy lines
Step 8: Fully assembled
Be certain campfires are extinguished. Dispose of trash appropriately.
Step 9: Disassembly and packing the tent
1) Remove and fold fly
2) Be sure to leave the doors and windows unzipped to avoid zipper damag.
3) Remove stakes with hammers or stake puller. DO NOT pull on tent.
4) Take down the tent , disassemble in reverse order.
5) Depress the locking button and collapse each telescoped leg.
6) Fold legs inward from the corner joint.
7) Fold all the poles together above the centre hub.
8) Lay tent on its side. Roll untill excess air is expelled.
9) Secure with ties and place in carry bag.
10) Keep loose poles and stakes in bags provided.
11) Tent must be clean and dry before storage. Store off concrete floor.
CTC 161209 05/15
