background image

SPECIFICATIONS:   

8 persons

 

 

 

Floor size: 

 

12’ x 9’ (3.66x2.74m)  

   Centre 

height: 

 76” 

(1.93m)

   Weight: 

  21.74 

lbs 

(9.860 

kg)

TROUBLESHOOTING GUIDE

PROBLEM

1. CONDENSATION

2. SEAM LEAKAGE

3. MILDEW

4. REPAIRING A TEAR

5. FAULTY ZIPPER

6. FADING FABRIC

7. FLOOR CONDENSATION

Condensation occurs when warm moist air inside tent comes in contact with cooler outside air. Avoid touching walls to reduce  contact leakage. Venting doors and 
windows will reduce condensation. Store wet clothing outside of tent. A battery powered fan may be helpful. Not applicable to screen houses.

Apply a generous amount of seam sealer on inside seams. Seam sealer may be purchased at any local sporting goods store.

To avoid mildew, store tent/screen house ONLY when thoroughly dry. However, if mildew occurs, use a soft bristle brush or sponge with mild dishwashing soap or Fels 

Naptha soap to clean. Let dry thoroughly, and a tent approved water repellent compound may be applied.

For small tears, use a self-adhesive patch kit. We recommend a canvas or awning repair shop for larger tears.

Zippers are self-repairing. If the zipper separates, you can move the slider to the beginning of the zipper tape and rework the zipper. 

Do not leave up in direct sunlight longer than necessary. If left in sunlight for prolonged periods of time, fabric will fade and weaken.

8. USE OF STAKES

Stakes should be installed at a 

45°

 angle using a hammer or mallet. Stake loops should be kept taut without over-stretching fabric or webbing. This could cause tears or 

leakage. To remove safely, use a hammer or stake puller. Do not remove by pulling on the fabric.

SOLUTION

A ground cloth under the floor helps prolong its life, provides additional insulation and moisture protection. The cloth should be smaller than the floor to prevent rain 
from running under the tent.  Not applicable to screen houses.

KEY
NO.

MODEL NO.  CTC161209 (076-5449-4) INSTANT CABIN 

QTY.
REQ.

DESCRIPTION

1

10

HFFCTC161209

Replacement Fly

Tent Stakes

HMS4-7

PART NO.

REPLACEMENT PARTS

Call customer service for Instant frame replacement parts

A

CTC 161209    05/15

Summary of Contents for 076-5449-4

Page 1: ...upants Have a minimum of two adults for assembly During assembly poles are under tension If not held firmly in place during assembly poles could break or flip up possibly causing serious injury Safety glasses may be worn throughout the assembly process as an additional precaution Exercise care when using electric devices in and near tents CTC 7 DAY REPLACEMENT WARRANTY Unpack and inspect all conte...

Page 2: ...al the inside stitched seams of the tent This will improve weather resistance Available in sporting goods departments Discolouration may occur if applied to outside seams Tent Stakes 10 each Main Frame with Connector pre attached to the tent 1 each A Instant Frame 1 each 1 each A Instant Frame Step 3 Spread the tent 1 Instant frame is pre attached to the tent 1 Set the tent in desired location 2 L...

Page 3: ...kes Tent must be secured for proper function Tent appears as shown Step 7 Secure guy lines Step 8 Fully assembled Be certain campfires are extinguished Dispose of trash appropriately Step 9 Disassembly and packing the tent 1 Remove and fold fly 2 Be sure to leave the doors and windows unzipped to avoid zipper damag 3 Remove stakes with hammers or stake puller DO NOT pull on tent 4 Take down the te...

Page 4: ...ed For small tears use a self adhesive patch kit We recommend a canvas or awning repair shop for larger tears Zippers are self repairing If the zipper separates you can move the slider to the beginning of the zipper tape and rework the zipper Do not leave up in direct sunlight longer than necessary If left in sunlight for prolonged periods of time fabric will fade and weaken 8 USE OF STAKES Stakes...

Reviews: