background image

0359 

Assembly and Operating Instructions for Outback®  

NEW Apollo 4 Burner Gas BBQ

 

Drawings are not to scale. 
Specifications subject to change 
without prior notice. 

 
 
 
 

 

WARNING 

• 

For outdoor use only. Not for commercial use.

 

• 

Read instructions before using the appliance. Failure to follow instructions could 
result in death, serious bodily injury, and/or property loss.

 

• 

Warning: accessible parts may be very hot. Keep young children and pets away.

 

• 

Do not move the appliance during use.

 

• 

Turn off the gas supply at the gas bottle after use.

 

• 

Any modification of the appliance, misuse, or failure to follow the instructions may 
be dangerous and will invalidate your warranty. This does not affect your statutory 
rights.

 

• 

Retain these instructions for future reference.  

• 

Leak test annually, and whenever the gas bottle is removed or replaced. Check that 
the hose connections are tight and leak test each time you reconnect the gas bottle. 

• 

For Flare-up control please refer to the ‘OPERATION’ section of this manual. 

FOR YOUR SAFETY 

 

If you smell gas: 
1. 

Shut off gas to the appliance. 

2. 

Extinguish any open flame. 

3. 

Open barbecue lid or hood. 

4. 

If odour continues, discontinue use and 
contact your local dealer. 

FOR YOUR SAFETY 

 

1. 

Do not store or use petrol or other flammable 
vapours or liquids in the vicinity of this or any 
other appliance. 

2. 

A gas bottle not connected for use must not be 
stored  in  the vicinity  of  this  or  any  other 
appliance. 

MF4493

 

Summary of Contents for MF4493

























Reviews: