900-0127-01-00 Rev B
5
EnergyCell Batteries
Welcome to OutBack Power Systems
Thank you for purchasing the OutBack EnergyCell battery. The EnergyCell is a series of absorbed glass-mat
(AGM) batteries with a valve-regulated lead-acid (VRLA) design. These products are designed to provide long,
reliable service with minimal maintenance. Several versions of EnergyCell are available. All have high recharge
efficiency and a compact footprint for higher energy density. All have a thermally welded case-to-cover bond to
eliminate leakage, all are 100% recyclable, and all are UL-recognized components.
EnergyCell GH Battery
Figure 1 EnergyCell GH Battery
EnergyCell RE Battery
Figure 2 EnergyCell RE Battery
The EnergyCell GH uses pure lead plates. It is intended to receive continuous float charging under
normal conditions when utility power is present.
Intended for use with grid backup (float service) applications with occasional interruptions but minimal cycling
Pure lead plates for long float service life in battery backup applications
Extended shelf life
11.1”
(28.3 cm)
4.9” (12.6 cm)
22.1” (56.1 cm)
The EnergyCell RE uses pasted lead-calcium-tin plates. It is designed for regular discharge/charge cycles.
Intended for use in backup, off-grid, and renewable energy (RE) sites with OutBack inverters, charge controllers,
and other devices that require the use of deep-cycle batteries
Lead-calcium-tin alloy plates for long life in both cycling and float applications
High-density pasted plates
for high cycle life
11.1” (28.3 cm)
EnergyCell170RE
12.6” (32.0 cm)
EnergyCell200RE
4.9” (12.6 cm)
22.1” (56.1 cm) EnergyCell170RE
22.0” (55.9 cm) EnergyCell200RE
