Oursson DM5210, Instruction Manual

Page: 8 / 16

8
commercial, industrial or other activities, arising from
the use of or inability to use the product.
9. Due to continuous product improvement, design ele-
ments and some technical specifications are subject
to change without prior notice from the manufacturer.
Using the product when after the terms of use (lifetime):
1. Lifetime set by OURSSON AG for this product applies
only when the product is used exclusively for personal,
family or household needs, as well as the consumer
observes the correct operation, storage and trans-
portation of products. Under thecondition of careful
handling of the product and compliance with the rules
of operation the actual life may exceed the lifetime set
by OURSSON AG.
2. At the end of the product lifetime, you should contact
an authorized service center for to conduct a preven-
tive maintenance of the product and determine the
suitabilityfor further use. Work on conducting a pre-
ventive maintenance of the products is also made in
service centers on paid basis.
3. OURSSON AG does not recommend the use of this
product after the end of its lifetime without its preven-
tive maintenance by the authorized service center,
since inthis case, the product can be dangerous to the
life, health or property of the consumer.
Product Recycling and Disposal
This appliance has been identified in accordance with the
European directive 2002/96/EG on Waste Electrical and
Electronic Equipment – WEEE.
After the expiration of the lifetime, the product cannot be
disposed with another household waste. Instead, it shall be
deposited in the appropriate recycling collection point for
electrical and electronic equipment for proper treatment and
disposal in accordance with federal or local law. By disposing
correctly this product, you will help to conserve natural re-
sources and preventing the product from damaging
the environment and human health. For more infor-
mation on the collection point and recycling of this
product, please contact your local municipal author-
ities or the enterprise for household waste disposal.
Date of manufacture
Each product has a unique serial number in the form of
alphanumeric row and is duplicated with a barcode that
contains the following information: name of the product
group, date of manufacture, serial number of the product.
Serial number is located on the rear of the product, on
the package and the warranty card.
The first two letters-correspondence to the product
group (Donut maker – DM).
The first two digits – year of manufacture.
The second two digits – month of manufacture.
The last two digits – serial number of product.
To avoid misunderstandings, we highly rec-
ommend you to read carefully the instruction
manual and the warranty obligations. Check the
correctness of the warranty card. Warranty card
is valid only if the following are correctly and
clearly stated: model, serial number, date of
purchase, clear stamps, buyer’s signature. The
serial number and the model of the device must
be the same as in the warranty card. If these
conditions are not fulfilled or the data specified
in the warranty card was changed, the warranty
card is invalid.
DM20080 11234567
1 2 3 4
OURSSON AG
Made in China
If you have questions or problems with OURSSON AG products – please contact us by e-mail:
support@oursson.com
This manual is under protection of international and EU copyright law. Any unauthorized use of the instructions, including cop-
ying, printing and distribution, but not limited to, involves the application of the guilty person to civil liability and criminal liability.
Contact information:
1. Manufacturer of goods - OURSSON AG (Orson AG) Rue du Grand-Chêne 5, 1003 Lausanne, Switzerland.
2. Certification information product available on the website www.oursson.com.