Oursson DM5210, Instruction Manual

Page: 4 / 16

4
• If the power cord is damaged, it must be replaced by
a specialist from the authorized service center (ASC)
OURSSON AG to avoid danger.
• Use only the tools, which are included in the product
set.
• When cleaning the appliance do not use abrasives
and organic cleaners (alcohol, gasoline, etc.). When
cleaning the device it is allowed to use a small
amount of neutral detergent.
RECOMMENDATIONS
• Please read the instruction manual before using the
device. Keep the manual after reading for further use.
• All illustrations in this manual are schematic repre-
sentations of real objects, which may differ from the
actual images.
Do not leave the appliance unattended.
The operation of this device in any case does
not imply application of any force to it, as this
may damage the product due to user fault.
PRODUCT SET
Electric Donut Maker ............................................... 1 pc.
Instruction Manual ................................................... 1 pc.
Warranty card .......................................................... 1 pc.
ELEMENTS OF DESIGN, Pic. B
1
2
3
4
5
6
Body of the Electric Donut Maker
Heat-insulated handle
Mount
Network indicator (red)
Heating surface with non-stick coating
Power cord
When using electrical appliances should take the fol-
lowing precautions:
• Use the device according to the following instructions
manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the product
set.
• To protect against risk of electrical shock do not
put the cord in water or other liquid. If for some
reason the water got into the unit, contact an au-
thorized service center (ASC) OURSSON AG.
• For power supply, use a power grid with proper char-
acteristics.
• Do not use the device in areas where the air can con-
tain vapors of flammable substances.
• Never attempt to open the device by yourself –
it could possibly be the reason of an electrical
shock can lead to product malfunction and will
invalidate the manufacturer’s warranty. For re-
pair and maintenance, contact only authorized
service centers meant for repair of products un-
der the trademark OURSSON.
• When moved from a cool to a warm place and vice
versa unpack it before use and wait 1-2 hours without
turning it on.
• In order to prevent electrical shock do not immerse
the entire product or the wires into the water.
• Be particularly careful and cautious when using the
device near children.
• Do not touch any hot parts, as this may cause injury.
• The power cord is specially made relatively short in
order to avoid the risk of injury.
• Do not allow the cord to hang over the sharp edge of
the table or touch hot surfaces.
• Do not connect this device to a grid which is over-
loaded with other appliances: it can lead to the fact
that the device will not function properly.
• Do not install the device near gas and electric stoves
and ovens.
• After use, make sure to disconnect the device from
the power grid.
• Keep the device from bumps, falls, vibration and oth-
er mechanical influences.
• Make sure to disconnect the device from the power
grid before cleaning or changing accessories.
• Do not use the device outdoors.
• This appliance is not intended for use by persons (in-
cluding children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge. They can only use the device under the supervi-
sion of the person responsible for their safety, or after
instruction on the safe use of the device. Do not allow
children to play with the product.
• This product is intended only for use in the home.
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the
instructions.
SAFETY INSTRUCTIONS, Fig. A
EN
PREPARING ThE DEvICE FOR OPERATION
Carefully remove the device and its accessories from
the box. Remove all packing materials and promotional
labels.
Be sure to keep in place the warning decals, directional
decals (if any), and the device’s serial number plate on
the device body!
Wipe the heating surfaces with a damp cloth and the
body with a dry cloth. Cleaning recommendations Pic. C.
BEFORE FIRST USE
1. Wipe the baking dish with some oil before first use.
2. Turn on the device with the halves closed for about
10 minutes.
NOTE: When the device is heated for the first time, the
protective grease is removed from the surfaces. In this
case, a short-term emission of a small amount of smoke