Jiangsu Ouring 3D Technology Co.,Ltd
21
Note:
When you need to withdraw the material from the device, please select the
corresponding returning nozzle through “L” and “R” in the “In/Return” interface, and set
the appropriate withdrawal by“
” / “
” Feed the temperature and click the
“Return” button. When the material is retracted above the “Thread Feeder”, the
material wire is drawn out of the device.
3.2 Adjusting
Use the “head calibration” function after the feed is completed. Adjust the distance
between the nozzle and the platform → “Platform leveling” function After the level of
the platform is calibrated, the printing operation can be started.
"Nozzle calibration", "platform leveling" use range:
“Nozzle calibration” and “Platform leveling” are calibration functions that are used by
the device for daily use. This function can be adjusted according to the actual use
situation (curling on one side of the model when printing) or once a week. If the model
printing is stable, Then the function does not need to be adjusted.
Note: Please clean the “printing platform” and “nozzle” before “head calibration” and
“platform leveling”.
3.2.1 Extruder adjusting
Extruder adjusting steps 1 - 2
On the device main page, click the "Advanced" option, and select the "head calibration"
