Jiangsu Ouring 3D Technology Co.,Ltd
19
(Note: The feeding end of the left feeding box of the feeding box is the left nozzle; the
feeding end of the feeding port of the right box is the right nozzle.
4.
The material wire exposed by the nozzle end pipe is straightened, and the "wire feeder
handle" (see the following figure) of the feeding nozzle is continuously pressed, and the
material wire exposed by the material pipe is inserted into the blue hole, and the "send"
is released. The wire handle" allows the "wire feeder" inside the nozzle to clamp the
material wire and insert the tube into the blue hole.
（
sketch of the handle of feeding tube
）
5.
After the "wire feeder" inside the nozzle clamps the material wire, place the material
tray in the cartridge and cover the cartridge cover
Handle of right extruder
Handle of left
extruder
