Once the modem has been configured in accordance with the instructions above, it is recommendable to do backup
of the settings again. Go to
System -> Backup / Flash Firmware
. Backup is made by pressing the
”Generate ar-
chieve”
button. Backup is restored by searching for the file from your computer by pressing the ”Browse” button
and then pressing
”Upload archieve”
button.
NOTE! Spaces are also relevant. Check that the code is correct.
[ - e / s b i n / w a n d e t e . s h ] & & r m / s b i n / w a n d e t e . s h
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
16. Go to
Network -> Firewall -> Custom Rules
.
Add the following program code:
# This command is required to get WAN port to operate as second LAN port,
# but some additional configuration is also required.
# This line has to be commented out if WAN port is going to be used as WAN port again.
At the end, press the
”Submit”
button.
17. Finally, sign out by pressing
”Logout”
but-
ton. Disconnect the power cord from the
modem. When the modem is switched on
next time, the correct settings are ready
and the modem is ready for use.
2017
1006
