OUMAN 3G-MOD4 Installation And Start-Up Instructions Manual Download Page 4

4

5.  Next go to 

Network -> Interfaces

Make sure the 

Network Watchdog

 status is set to 

enable

. Set your Network down timeout in minutes 

to 

120

.  Save by clicking  

Save & Apply. 

6.  Next go to 

Network -> Interfaces -> CELLULAR.

 

Tap on the APN field, and enter your operator’s 
APN:  

”internet.telia.iot”, 

internet” 

or

 ”internet.

saunalahti

”. If your operator uses a different 

address, type it in this field. Tap on the Service 
Type field and select

 “3G / UMTS only”.

 Save by 

clicking 

Save & Apply. 

7.  Go to 

Network -> Interfaces -> LAN

. Scroll down to 

the DHCP server. On the 

General Settings

 tab, set 

the DHCP server Leasetime to 

4h

. Save by clicking 

Save & Apply.

NOTE! Operator connection settings may have changed 
since writing this manual. If the internet connection does 
not work with the above mentioned APN settings, check 
the current settings from the operator.  

Operator

APN

Telia 3G-L3

internet.telia.iot

Telia

internet

DNA

internet

Elisa

internet

Saunalahti

internet.saunalahti

Summary of Contents for 3G-MOD4









Reviews: