EN
33
Safety use:
WP13 has an increased resistance. However, it is
not mechanically undestroyable.
The display is made of tempered glass, which
ensures higher resistence against scratches. When
dropped on a hard surface or sharp object, it may
crack. The display cracked due to mechanical
damage or improper misuse of the device is not
covered by warranty.
The WP13 has the IP68 and IP69K certification
under ISO 20653:2013 standard.
(According to producer 1,5 m depth for 30 minutes,
IP68 resistance does not apply to salt water.)
The IP68 protection does not guarantee 100%
resistance to water in all conditions.
We also recommend to not to charge the phone
and dry the phone
´s connector after contact with
water or other liquid with the adequately warm air
flow (up to 40°C).
Always keep the input of the charging jack tightly
closed with cap when not charging the phone.
Before closing, check that the cover is not dirty
(fabric fibers, hair and other dirt can limit the
functionality of the cover seal)
Penetration of humidity into the equipment due to
incorrectly "closing" the phone cannot be honored
Warranty.
The warranty is not applied to an intentional
damage to the phone.
