- A tag is located at 50% of the cable length. During installation of the product,
verify the cable half tag to compare with your cable layout planification. Adjust
pattern with the result to cover the surface. If the cable is too long, use the
buffer zone to spend the remaining cable.
Never shorten the heating cable.
The heating cable must not be shortened, neither cut.
- Avoid walking on the
Therma Cable
system. If you must, wear soft rubber soled shoes;
-
Always start the Therma Cable at least 50 mm (2”) from the walls
;
- It is important not to subject the heating cable to any mechanical strain
(stretching, bending radius under 20 mm [3/4”], scoring).
Never cut or score the heating cable.
Measure the cable’s electrical and insulation resistance and record
the readings on line
2) After installing the heating cable
of the
measures’ table.
16
Fig. 4.4 c
IMPORTANT!
Summary of Contents for Therma Cable
Page 1: ...INSTALLATION GUIDE October 2009 Edition...
Page 2: ......
