Ouellet SED09KCH17S, Owner'S Manual

Page: 14 / 40

● Please put the remote controller near user when this function is set. Do not put
●
12
Clock time adopts 24-hour mode.
The interval between two operations can’t exceeds 5s. Otherwise, remote contro-
ller will quit setting status. Operation for T-ON/T-OFF is the same.
Introduction for buttons on remote controller
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I FEEL function and " " will disappear.
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.When I FEEL function
is turned on, the remote controller should be put within the area where indoor
unit can receive the signal sent by the remote controller.
Note:
●
WiFi button
13
button
Press this button to achieve the on and off of health and scavenging functions in
LCD displays " ". Press the button for the second time to start health and
10
CLOCK button
Press this button to set clock time. " " icon on remote controller will blink. Press
▲
"▲" or " " button within 5s to set clock t im e. Each pressing of "▲" or " " button,
▲
clock time will increase or decrease 1 min ute. If hold "▲" or " " button, 2s late
▲
r,
time will change quickly. Release this button when reaching your required time.
● This function is only available for some models.
When WiFi function is turned on, " WiFi " icon will be displayed on the remote
controller; when WiFi function is turned off, " WiFi " icon will disappear.
How to turn on WiFi
：
Press " WiFi " button to turn on WiFi function.
How to turn off WiFi
：
Hold " WiFi " button for 5s to turn off WiFi function.
Under off status, press "MODE" and " WiFi " buttons simultaneously for 1s, WiFi
module will restore factory settings.
11
SLEEP button
Under COOL, or HEAT mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and " " icon will disappear.After powered on, Sleep Off is defaulted. After
the unit is turned off, the Sleep function is canceled.
In this mode, set temperature will be adjusted with the change of time. Under Fan
、
DRY and Auto modes, this function is not available.
14