HEAT
●
●
When selecting auto mode, air conditioner will operate automatically according
to ex-factory setting. Press "
F
AN" button can adjust fan speed. Press " " / " "
button can adjust fan blowing angle.
After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator " " on indoor unit is ON. (This indicator is not available for some mod-
els.) Pres
▲
s "▲" or " " button to adjust
s
et temperature. Press "FAN" button to
adjust fan speed. Press " " / " " button to adjust fan blowing angle.
When selecting dry mode, the air cond
it
ioner operates at low speed under dry
mode. Dry indicator " " on indoor unit is ON. (This indicator is not available for
some models.) Under dry mode, fan speed can’t be adjusted. Press " " / " "
button to adjust fan blowing angle.
●
2
MODE button
Press this button to select your required operation mode.
AUTO COOL DRY
FAN
Introduction for buttons on remote controller
Note:
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.
After putting through the power, the air conditioner will give out a sound.
Operation indicator " " is ON (red indicator, the colour is different for different
models). After that, you can operate the air conditioner by using remote controller.
●
● Under on status, pressing the button on the remote controller, the signal icon " "
on the display of remote controller will blink once and the air conditioner will give
out a “di” sound, which means the signal has been sent to the air conditioner.
As for the models with functions of WiFi or wired controller, the indoor unit must
has been controlled by standard remote controller under auto mode first, and then
the function of adjustable temperature under auto mode can be realized by APP or the
wired controller.
This remote controller can adjust the temperature under auto mode. When matching
with the unit which is without the function of adjustable temperature under auto mode,
the set temperature under auto mode may be invalid, or the displayed set temperature
on the unit is not same as that on the remote controller under auto mode.
●
●
1
ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
10
Summary of Contents for SED09KCH17S
Page 39: ......
Page 40: ...66129935048 ...