6
Both variants of the control panel holder for the z50 are attached to the armrest beneath the armrest pad. To
remove the control panel, first pull out the central plug which is attached to the frame, and then remove the
control panel.
5 Adjusting and Replacing z50
5.1 Control Unit
There is only one control panel variant available for the z50 power add-on drive. The control panel is
attached to the plug-on holder with two screws. Therefore, the control panel is disconnectable and can be
easily mounted and removed.
Note:
For adaption of the z50 power add-on drive, the desk side panel is always recommended!
Control panel holder
Standard control panel holder
The two control panel holders are attached in the same way to the side panel of the manual wheelchair. Both
are clamped with an iron rail to the underside of the armrest pad of the desk side panel.
Control panel holder, swing-away in parallel
Summary of Contents for z50
Page 1: ...z50 Service Instructions ...
Page 2: ......
