5
5.4 z50 Wheels
Attention
Replace the casing if it is bald or shows cracking or other damage.
For
instructions
on how to replace the tires, please see service instructions manual for the
manual wheelchair.
z50 wheel position
The height setting of the z50 wheel depends on the data in the order form.
However, the z50 wheel position can be changed later using the four position holes which are provided in the
wheel attachment plate. For data about the individual setting positions and wheelchair models, please see
the Technical Data section.
To change the position, loosen the nut on the threaded bushing. You require two 24 mm open-end wrenches.
Insert the threaded bushing into the new hole, replace the positioning rings on the threaded bushing and re-
tighten the nut.
Summary of Contents for z50
Page 1: ...z50 Service Instructions ...
Page 2: ......