Otto Bock SKIPPI, Instructions For Use Manual

Page: 13 / 68

Label Meaning
A
Power driving mode: lock motor brake
B
Manual driving mode: unlock motor brake
3
WARNING
Moveable parts may crush or cut.
Keep hands away.
(Only in case of installation of ISO sets according to ISO
7176)
Fixation point/eyebolt to attach the product in vehicles for trans­
porting persons with reduced mobility
5 Delivery
5.1 Scope of delivery
• Fitted power wheelchair with main components
• Installed options
• Battery charger
• Instructions for use
5.2 Options
The standard model can be fitted to the user's personal requirements thanks to a large range of options.
A full list of the available modules and accessories is shown on the order form and in the accessories catalogue.
To use options: see Page 19 et. seq.
5.3 Storage
5.3.1 Storage during daily use
The power wheelchair should always be protected against external influences.
The control unit must be turned off.
5.3.2 Storage during extended disuse
NOTICE
Deep discharge
Battery damage due to standby current
► Remove the fuse if the wheelchair is not used for more than 3 days.
Please observe the following if the power wheelchair is not used for more than 3 days :
Storage conditions
• Maintain an ambient temperature between
-15 °C and +40 °C (5 °F and +104 °F)
and relative humidity
between
45 % and 85 %
.
• Store the power wheelchair in a dry, enclosed room with sufficient air circulation and protection from external
influences.
• Protect the wheels against ground frost, e.g. by relieving them completely through assembly blocks or wooden
boards.
• Maintain sufficient clearance from sources of heat. If the product is parked for an extended period of time or
the tyres overheat (e.g. in the vicinity of radiators or in case of exposure to strong sunlight behind glass), the
tyres may become permanently deformed.
• Fill pneumatic tyres with slight overpressure.
13 Skippi
Delivery