Otto Bock SKIPPI Instructions For Use Manual Download | Manualshive

Page: 47 / 68

background image

8.15 Additional options

8.15.1 Control panel holder

Control panel holder, standard

The control panel holder can be pulled off to the front when needed.

34

Pulling off the control panel holder

1) Grasp the control panel holder on the front.
2) Pull the control panel holder off to the front.

Installing the control panel holder

1) Insert the control panel holder into the rail.
2) Slide the control panel in to the rear.

Swing-away control panel holder

The control panel holder makes it possible to drive the power wheelchair under a table or closer to an object.
The control panel holder can be rotated up to the armrest.

35

Swinging away the control panel holder

1) Apply slight pressure to push the control panel

holder to the side.

→

The pivot element is unlocked.

2) Swing the control panel holder away to the side.

INFORMATION: The pivot element locks in
place again when the holder is rotated back to
the original position.

36

Removing/installing the control panel

1)

Removing:

Pull the control panel up and off the ball

head.

2)

Installing:

Set the control panel onto the ball head

and push it down.

8.15.1.1 Adjusting the control panel position

INFORMATION

By default, the control panel is mounted on the side specified in the order. It can also be mounted on the other
side of the power wheelchair later on if the user so desires. Please contact the qualified personnel who delivered
the product to you.

47

Skippi

Use

«
...
45
46
47
48
49
...
»

Summary of Contents for SKIPPI





































































Reviews:

No comments

Related manuals for SKIPPI

Brand: MedRx Pages: 14

Brand: Alber Pages: 8

Brand: FIOR & GENTZ Pages: 55

Brand: Ossenberg Pages: 2

SystemRoMedic 43804002

Brand: Direct Healthcare Group Pages: 32

Brand: Direct Healthcare Group Pages: 42

Ricon Faiveley FoldOver FR2E Series

Brand: Wabtec Pages: 40

Brand: Able 2 Pages: 9

Brand: Vitea Care Pages: 6

Brand: Invacare Pages: 8

Brand: Invacare Pages: 12

Brand: Invacare Pages: 12

Brand: Invacare Pages: 40

Brand: Invacare Pages: 124

Brand: Tuni Pages: 10

Brand: Medical Depot Pages: 2

Drive crawlabout CAB 2000

Brand: Medical Depot Pages: 2

Brand: Gordon Ellis & CO Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands