16
Retrofit of the Storage Basket
First decide whether the storage basket should be
attached in the middle or laterally shifted to the right
or left.
Fasten the locking disk at the selected position.
Mounting the Quick-release Lock
Attach both plastic bars to the grip bar.
Push the housing of the quick-release lock onto the
plastic bar and screw on the plastic bar so that the
quick-release lock faces upwards at an angle.
Insert the cable clamp into the housing of the quick-
release lock.
4.8 Storage Basket
Wrap the cable around the locking disk and, from
above, through the opening on the backside of the
housing and through the cable clamp.
Let the ends of the cable overlap below.
First, clamp the cable with a cable clamp in place
on one side. Pull the cable on its free end taut and
fasten the cable with a second cable clamp.
Bend the overlapping cable ends over and toward
the middle.
Turn the quick-release lock on the grip rail down-
wards until the cable is tense. Now firmly re-tighten
the four screws in the housing.
For disassembling, please proceed in reverse order.
Summary of Contents for Nurmi Neo
Page 1: ...Nurmi Neo Service Manual ...