Otto Bock Nurmi Neo, Service Manual, Page: 15 / 27

14
4.6 Rear Wheel
Exchanging an Anti-tipper Holder
Loosen and remove the screw connection of the rear
wheel and remove the rear wheel from the posterior
frame.
Remove the anti-tipper holder from the posterior
frame.
For re-assembly, please proceed in reverse order.
Exchanging a Rear Wheel
Loosen and remove the screw connection of the rear wheel and remove the rear wheel from the posterior
frame. Pay attention to the spacer washer between the wheel and the frame and the collar bush in the anti-
tipper holder.
For re-assembly, please proceed in reverse order. Use a new, self-locking nut.
Tighten the screw connection with a
torque
of
20 Nm
.
Attention :
Wheels with EVA foam tires must be replaced, if the material shows signs of cracking or damage and
when the tread becomes worn down to such an extent that there is only 5 mm of radius left on the outer
edges of the tire. (refer to 4.5)