Otto Bock Kimba neo Instructions For Use Manual Download Page 12 | Manualshive

Page: 12 / 60

background image

CAUTION

Incorrect centre of gravity setting

Falling of the user due to extreme settings

►

Check the standard adjustments of the rehab buggy for stability against tipping and the ergonomically correct
sitting position of the user. Avoid any extreme settings.

CAUTION

Changed centre of gravity after operating the seat tilt

Tipping over, falling out of the user due to adjustment error

►

Check the tip resistance each time after changing the seat tilt, especially in combination with a back support
angle setting. To do so, hold the product with both hands by the push handle/push bar.

CAUTION

Change in centre of gravity following back angle adjustment

Falling over, falling out of the user due to adjustment errors

►

After each modification of the back angle, check the tilt stability. To do so, hold the product with both hands
by the push handle/push bar.

CAUTION

Risky operation

Falling, tipping over backwards due to approaching obstacles incorrectly

►

Push slowly when crossing obstacles (e.g. steps, curbs) and negotiating uphill or downhill slopes and
inclines.

►

Never cross obstacles at an angle. Always approach obstacles head on (at an angle of 90°).

►

Raise the front wheels before crossing obstacles.

►

Avoid collisions with obstacles and dropping off curbs/ledges.

►

Avoid riding cross-country.

Hazards when overcoming obstacles

WARNING

Overcoming steps and obstacles without assistance

Tipping over, falling of the user due to failure to observe transportation instructions

►

Always have accompanying persons help you negotiate steps and other obstacles.

►

Use available facilities (e.g. access ramps or lifts).

CAUTION

Improper lifting by attendants

Tipping over, falling of the user due to lifting by removable components

►

Attendants may lift the buggy only by welded or permanently attached components (e.g. front frame tube
above the front wheels, rear axle).

►

It is particularly dangerous to lift the buggy by the unfixed push handle/push bar.

Hazard in case of broken skin

CAUTION

Skin damage

Skin damage or pressure points due to overloading

►

Check your skin for intactness before and during use of the product.

►

Pay attention to diligent skin care and pressure redistribution during interruptions in using the product.

►

If skin damage or other problems occur during use, stop using the product. Consult the qualified personnel.

12

Safety

Kimba Neo, Kimba Cross, Kimba Inline

«
...
10
11
12
13
14
...
»

Summary of Contents for Kimba neo





























































Reviews:

No comments

Related manuals for Kimba neo

Brand: Leetop Pages: 29

Brand: RTimes Pages: 26

BaByBjörn Baby Carrier Origina

Brand: BabyBjorn Pages: 5

Brand: Baby Jogger Pages: 4

Brand: NéoBulle Pages: 36

Citi Side Protection System

Brand: Maxi-Cosi Pages: 100

Brand: TQ Pages: 34

Brand: Steelcraft Pages: 36

Freescale TWR-TWRPI-BD

Brand: NXP Semiconductors Pages: 7

Brand: Go-Go Babyz Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands