Otto Bock Kimba neo Instructions For Use Manual Download | Manualshive

Page: 10 / 60

background image

The  product  may  only  be  used  with  the  options  that  are  listed  on  the  product  order  form.  Ottobock  assumes  no
liability  for  combinations  with  medical  devices  and/or  accessories  from  other  manufacturers  outside  the  modular
system.
Combinations  based  on  a  combination  agreement  that  have  been  evaluated  for  effectiveness  and  safety  are  an
exception to this.

3.2 Indications

•

Minor to pronounced or complete restrictions of mobility

3.3 Contraindications

3.3.1 Absolute Contraindications

•

None known

3.3.2 Relative Contraindications

•

Failure to meet physical or mental requirements

3.4 Qualification

Installation and adjustment tasks may only be carried out by qualified personnel. Compliance with all manufacturer
specifications and all applicable legal provisions is required. Please contact the manufacturer’s service department
for further information (see inside or outside of rear cover for addresses).

4 Safety

4.1 Explanation of warning symbols

WARNING

Warning regarding possible serious risks of accident or injury.

CAUTION

Warning regarding possible risks of accident or injury.

NOTICE

Warning regarding possible technical damage.

4.2 Safety instructions for assembly and adjustments

WARNING

Making incorrect adjustments

Risk of falling, tipping over or malposition of the user due to incorrect settings

►

Settings may only be changed by qualified personnel unless otherwise prescribed.

►

Before testing setting changes with the user seated, all screw connections must be firmly tightened.

►

Check the product for safety and functionality after changing the settings.

CAUTION

Unsecured screw connections

Pinching, crushing, tipping over, falling of user due to assembly errors

►

After all adjusting/readjusting work, retighten the attachment screws/nuts firmly.

►

Please note that all adjustment levers are tightened by hand without the help of tools.

4.3 Safety instructions for use

Hazards during preparation for use

WARNING

Independent modification of settings

Serious injuries to the user due to improper changes to the product

►

Do not modify the settings established by the qualified personnel. Only the settings described in the section
“Use” in these instructions for use may be adjusted independently.

►

In case of problems with the settings, please contact the qualified personnel who adjusted your product.

10

Safety

Kimba Neo, Kimba Cross, Kimba Inline

«
...
8
9
10
11
12
...
»

Summary of Contents for Kimba neo





























































Reviews:

No comments

Related manuals for Kimba neo

Brand: Hema Pages: 23

Brand: Marsupial Pages: 19

Brand: Bebecar Pages: 34

Brand: Avermedia Pages: 38

Deluxe Back Pack

Brand: Baby Trend Pages: 5

CENTER MOUNT CHILD CARRIER

Brand: WeeRide Pages: 13

Brand: Stokke Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands