19
PIC1
PIC2
PIC3
PIC4
Full torso support vest:
Install - choose desired backrest belt-holes in backrest to set the proper position of the shoulders straps. Pass the
upper belt through the backrest belt-holes (see PIC2). Anchor the belt webbing with the plastic slip lock with laby-
rinth-like fastening (see PIC3). Release the buckle of the middle securing belt. Place it around the backrest tube and
fasten the buckle at the rear of the backrest (see PIC4 and 5). Loop both lower webbing ends to anchoring points
and fasten trough the plastic slip locks to secure its position (see PIC1)
Uninstall - follow chapter ―install‖, but in reverse sequence.
Size adjustment - Unzip the waistcoat, place the child into the buggy. Choose the hole in backrest to adjust the
proper position of the shoulders straps. (see PIC2) . The hole should be level with or higher than the top of the
shoulders (the shoulders straps must be mounted through backrest and backrest extension at once—size 38,42, when
possible). Adjust the length of all straps to desired , comfortable size.
