English
25
3. Settings.
3.3 Seat angle
To adjust the angle of the seat unit, pull
the release lever (
A
) upwards. The seat
unit can now be adjusted by applying
pressure in an active or passive posi-
tion.
It is optionally possible to mount the
release handle (
B
) for the seat angle
adjustment on the push bar.
3.4 Back angle adjustment
The backrest angle can be adjusted
via an optional push bar (
C
).
To do this, simply loosen the clamping
lever (
D
), bring the push bar into the re-
quired position and then pull the clam-
ping lever tight once more.
3.5 Adaptation of the seat unit
The
Kimba Home
sub-frame is prepared
to carry a seat unit. The seat adapter
represents the connection point.
Proceed as follows to mount the seat
unit:
• Place the seat unit on the rear tube
of the seat support at an angle of
approx. 45°.
• Press the front edge of the seat unit
onto the sub-frame until the re-
taining claw on the front tube of the
seat support audibly engages.
• Slide the seat latch (
E
) to the left to
close.
A
B
C
D
E
Summary of Contents for Kimba Home
Page 210: ...210 Notes ...
