manualshive.com logo in svg

Otto Bock Blizzard, Service Manual

Share
Download
Otto Bock Blizzard Service Manual Download Page 21

4.5.3. Replacing the Side Panels (Standard and Clothing Protector)

Remove the screws on the eccentric wheel (Fig. ) and completely remove them. (This will 

also make the stabilizer beneath the seat come loose, see section 4...)

Next, remove on both sides the screws of the side panel guides (Fig. 7). You can now 

completely remove the side panel.

For assembly, please proceed in reverse order.

4.5.4. Retrofit, Replacment, and Setting of the Height Adjustable Side Panels

First loosen the two screws of the side panel receiver and completely remove them. Now 

place the receiver in the desired position on the rear wheel attachment device and fix it 

(Fig. 4a). Insert the slide of the side panel into the receiver and fix it in the desired height 

using the screw provided (Fig. 4b).

To change the height, shift the screw tightened last to an alternative bore hole on the slide. 

Changing the rear wheel position lengthwise will also cause the side panel to move length-

wise.

Figure 4 a 

Figure 4 b

647G429_Blizzard_Inhalt GB.indd   19

05.04.2007   12:35:51 Uhr

Summary of Contents for Blizzard









































Reviews:

No comments

Brands by name

Popular brands

Load more brands