manualshive.com logo in svg

Otto Bock Blizzard, Service Manual

Share
Download
Otto Bock Blizzard Service Manual Download Page 16

4

4.3. - Seat

4.3.1. Replacing the Seat Upholstery / Bars for Upholstery

Fix the Blizzard in the assembly stand. Remove the rear wheels and, if present, the seat 

cushion and fold the backrest down onto the seat surface. In case of the tension adjustable 

upholstery, loosen the hook and loop connections to release the tension (Fig. 8). Using 

pliers, evenly pull the seat upholstery together with the upholstery bars to the rear out of 

the guides (Fig. ).

You may either reuse the upholstery bars or use new ones. If required, slide the upholstery 

bars into the flaps of the new seat upholstery. Then slide into the guides in the seat tube 

and evenly pull the upholstery up to the front. Close the hook and loop connections of the 

tension adjustable upholstery and fold the backrest back into upright position.

4.3.2. Replacing the Stabilizer

Remove the rear wheels. Loosen the two screws of the eccentric wheels until they do no 

longer hold the stabilizer, which is located under the seat bottom (Fig. 0). Replace the 

stabilizer with a new one. 

For assembly, please proceed in reverse order.

Figure 8 

Figure 

Figure 0

647G429_Blizzard_Inhalt GB.indd   14

05.04.2007   12:35:37 Uhr

Summary of Contents for Blizzard









































Reviews:

No comments

Brands by name

Popular brands

Load more brands