Hazards from incorrect use of the wheelchair
NOTICE
Use in wrong ambient conditions
Risk of damage to the product
►
Do not use the wheelchair in salty water
►
Also avoid – if possible – sand or other dirt particles that may damage the wheel bearings.
NOTICE
Overloading
Risk of damage to the product
►
Do not exceed the maximum load capacity (see chapter "Technical Data").
NOTICE
Inadmissible load in folded condition
Risk of deformation, problems when unfolding
►
Never place heavy items on the folded wheelchair.
NOTICE
Wear of the seat and backrest cover
Risk of damage to the product
►
Have the seat and backrest cover replaced immediately in the event of damage or wear.
2.4 Type plate and warning signs
Label
Meaning
A
Type designation
B
Manufacturer's article number
C
Maximum load capacity (see chapter "Technical Data")
D
Manufacturer information / address / country of origin
E
Serial number
F
International article number
G
Read the instructions for use before using the product.
A
B
D
E
G
C
H
F
D
Dum
my
H
CE symbol – product safety according to EU guidelines
(Safety loop on the wheelchair)
Caution!
The rear wheels have been pre-positioned according to your
indications. Before using the wheelchair, this pre-adjusted posi
tion must be checked by the wheelchair user for function and
stability against tipping with the assistance of qualified person
nel.
(For installation of restraint system on the wheelchair only)
Fixing point/restraint system for fixing the wheelchair in a motor
vehicle for the transportation of handicapped persons
The type plate can be found on the cross-brace.
13
12/2010
Safety
