Ottobock | 5
In the above illustration the knee lock is released when the lock lever (2) is
pushed distally. Re-routing the cable (5) through the other entrance hole (6)
will cause release of the lock when the lever is pulled proximally.
To change the position of the lock lever (2) from anterior to posterior, first
pull off the cover (not shown). Remove the oval head screw (3) and pull
the lock lever out of the housing (1). Rotate the lock lever 180° and reas-
semble in the reverse order.
The cable is secured by two set screws in the bushing (4) of the lock le-
ver. A hexagon wrench for use in securing and adjusting cable length is
enclosed for your convenience.
3 Disposal
In some jurisdictions it is not permissible to dispose of the product with un-
sorted household waste. Improper disposal can be harmful to health and the
environment. Observe the information provided by the responsible authori-
ties in your country regarding return, collection and disposal procedures.
4 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
4.1 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document.
The manufacturer will not assume liability for damage caused by disregard
of this document, particularly due to improper use or unauthorised modi-
fication of the product.
4.2 CE Conformity
The product meets the requirements of Regulation (EU) 2017/745on medical
devices. The CE declaration of conformity can be downloaded from the
manufacturer‘s website.
