Otto Bock 1C11 Terion K2, Instructions For Use Manual, Page: 16 / 188

► Always use the prosthetic foot with a suitable footshell.
► Apply or remove the footshell as described in the footshell instructions
for use.
5.1.2 Bench Alignment
TT bench alignment
Bench alignment process
Required materials:
662M4 goniometer, 743S12 heel height measuring
apparatus, 743A80 50:50 gauge, alignment apparatus (e.g. 743L200
L.A.S.A.R. Assembly or 743A200 PROS.A. Assembly)
Assemble and align the prosthetic components in the alignment apparatus
according to the following specifications:
Heel height: Effective heel height (shoe heel height - sole thick­
ness of forefoot)
+ 5 mm
Sagittal alignment: Alignment reference line on a–p markings
of the connection cap/footshell (see fig. 2)
Frontal alignment: Alignment reference line on m–l markings of
the connection cap/footshell (see fig. 2)
Connect the prosthetic foot and prosthetic socket using the chosen
adapters. Be sure to follow the adapter instructions for use.
Sagittal alignment:
Determine the centre of the prosthetic socket with the 50:50
gauge. Align the prosthetic socket centrally to the alignment refer­
ence line.
Socket flexion:
Individual residual limb f 5°
Observe the abduction or adduction position.
TF bench alignment
► Observe the information in the prosthetic knee joint instructions for use.
5.1.3 Static Alignment
• Ottobock recommends checking the alignment of the prosthesis using
the L.A.S.A.R. Posture and adapting it as needed.
• If necessary, the alignment recommendations (TF modular leg pros­
theses:
646F219*
, TT modular leg prostheses:
646F336*
) may be
requested from Ottobock.
16