5.4 Installing the OTT SVR 100
Attaching the swivel mount
(see also Appendix C)
䊳
Surface: Concrete or brickwork
䊳
Attachment material: e.g. hexagonal wood screws M6 x 40 + plastic dowels
䡵
Make two holes (Ø 8 mm) using a hammer drill
(use the wall bracket for marking the holes).
䡵
Insert the plastic dowels into the drill holes.
䡵
Attach the wall bracket with hexagonal wood screws.
䡵
Mount the housing bracket (without sensor) in the wall bracket and slightly
tighten the hexagon bolts
A
(see Fig.10).
䊳
Surface: any steel construction, e.g. cantilever arm
䊳
Attachment material: e.g. hexagon bolt M12 x 25 + hexagon nut M12 +
washers
䡵
Make a hole (Ø 13 mm) in the steel construction.
䡵
Attach the wall bracket using a hexagon bolt, washers and hexagon nut.
䡵
Mount the housing bracket (without sensor) in the wall bracket and slightly
tighten the hexagon bolts
A
(see Fig.10).
Plastic dowel
Wall bracket
Wall bracket
Steel construction
Washer
Hexagon bolt
Hexagon nut
Hexagon
wood screw
Fig. 8: Attaching the swivel
mount (wall bracket).
Both attachment types are intended as
examples and are possible for either
wall or ceiling installation.
12
Summary of Contents for SVR 100
Page 1: ...English Operating Instructions Surface Velocity Radar OTT SVR 100...
Page 2: ...We reserve the right to make technical improvements...
Page 34: ......
Page 35: ......
