4
Part 1.1 Installing on an Existing Compatible Granby Float Gauge
Skip to Part 1.2 (page 4) if your Otodata Home Heat Kit included a new float.
Step 3 Install Magnetic Disc
d.
Continue to hold the metal rod firmly with pliers or
other suitable tool and slip on the magnetic disc. You may
need to push downward with some force and rotate the
disc gently to help thread the disc onto the rod.
NOTE: You may need to file the tip of the metal rod to make
it rounded to facilitate the insertion of the new disc.
Step 4 Re-install Sight Glass
e.
Re-Install the sight glass by carefully placing it on
the fitting and tightening it by hand.
Skip to page 6.
Step 1 Remove the Sight Glass
a.
Remove the sight glass from the fitting by holding
it firmly and unscrewing it counter-clockwise.
Step 2 Remove Plastic Disc
b.
Hold the metal rod firmly with pliers or other
suitable tool;
c.
Gently pull the plastic disc upwards and remove
it completely.
