OTO Photonics
SS
SSH
SH2400 User Manual
12
SH2400-503 Rev. 1
File saving format and rule
While pressing
”Save”
button to save current measurement
data on the SD card with “.SPS” files in
Text Format
. And system
will construct specified folder and the rule of file naming is
shown as below:
Memory card is
New formatted
or
Never Use
on SH
series system:
System will automatically construct the “SPECXXX”
folder and in which XXX.sps files are generated while
saving process. The XXX is 3 digits index assigned by
system started from 000 to 999. Current system defines
maximum 1000 folders (000-999) can be saved and each
folder allows maximum 1000 (000-999) files index. The
number of file index will increase 1 every time when user
executes saving file request. And if the file index reaches
to 999, system will generate a new folder by increasing 1
on folder index name.
Memory card
Has Been Used
to save files on SH series
System:
System will search the card disk while saving request; it
will find out the largest folder index. Then check the
folder’s .sps file index number. If the file index < 999, it
will save the current .sps file with the new index increase
1. For example, if the last file index is 015, the new saving
files will be 016.sps. But if the file index in this folder has
reached 999, it will construct a new folder with folder
index increase 1 and save file index from 000 in new
folder.
Note.
If the disk contains too many dummy files, it will make the
searching process slow.
