Wiring Configurations-
Opening the Enclosure
41
NOTE: The unit will be wired for the power-type that is requested by
the purchaser when shipped from Otis Instruments, Inc.
NOTE: To ensure technician safety, always wire the relays BEFORE
supplying power to the device.
1.
Open the Enclosure Box.
2.
Unscrew the two Thumbscrews.
3.
Open the Front Panel.
4.
Locate the “12 to 35VDC” Terminal Block on the back of the
Terminal Board.
5.
Locate the “-V” and “+V” terminals on the Delta Power Supply
Summary of Contents for OI-7543
