11
This feature should be used to setup all channels (and their corresponding relays). The Basic Configuration
Menu includes:
A Duplicate Channel feature is available at the end of each channel setup sequence; choosing “Yes” for the
Duplicate Channel feature will duplicate all channels after the one that was just setup.
Each channel must be setup individually for each sensor. Therefore, Individual Channel Setup must be
completed the same number of times that there are sensors being monitored.
NOTE: To exit the Basic Configuration Menu at any time, touch ADD/SUB until you reach the Information
Screen then hit MENU
Basic Configuration Menu: Individual
Channel Setup
•
Channel Selection
•
Channel On/Off
•
Radio Address Setting
•
Relay On/Off,
•
Relay Setting Type (Rise/Fall)
•
Relay Value
•
Relay Latching/Unlatching for
each of the channels (and each
of the 3 relays per channel) that
the device will be monitoring (up
to four).
Summary of Contents for OI-7543
