Otic SB-7724, User Manual

Page: 14 / 20

12
USB OPERATION
1. Insert a USB device to the USB port (9).
2. Power on the unit as previously explained.
3. Press the MODE button (7) repeatedly, or press the USB button (R6) on remote
control directly to switch to the USB mode. The BT/USB lamp in MODE indicating
lamp set (2) will turn to White.
Then the audio tracks stored in the inserted USB device will be played automatically.
NOTE:
•
When a USB flash drive is inserted, the unit will automatically switch to USB mode
from the other audio input mode.
• The USB port (9) cannot be used for charging.
RECORDING OPERATION
1. Power on the unit as previously explained. Insert a U flash drive to the USB port (9).
2. Switch the audio input mode to Bluetooth, AUX IN or RCA IN mode as explained
above, and start playback on the connected device.
3. Press the REC. button (R15) or press and hold the MODE button (7) to start
recording. One beep tone will be heard when the recording begins.
4. Press the REC. button (R15) or press and hold the MODE button (7) to stop
recording. Two beep tone will be heard when the recording ends.
NOTE:
• The recording function only works in Bluetooth, AUX and RCA in mode.
• The recorded tracks will be stored in USB device automatically and will be played
in priority in USB mode.
5. If you press USB button (R6) during the recording process, the unit will turn to USB
mode and the recorded audio track will be played automatically.