Otic SB-7724, User Manual

Page: 11 / 20

9
BLUETOOTH OPERATION
1. Power on the unit as previously explained.
2. Press the MODE button (7) repeatedly, or press the BT button (R5) directly on re-
mote control to switch to the Bluetooth mode, the BT/USB lamp in MODE in-
dicating lamp set (2) will start to blink in Blue.
3. Power on the external Bluetooth enabled device and enter Bluetooth mode to
search the pairing name of the unit.
4. When SB-7724 appears, select it to make the connection.
5. After successfully paired, the BT/USB lamp will turn solid Blue.
6. Press the PAIR button (R16) to disconnect current connection and enter the
searching condition again. You can pair to new devices with this soundbar.
NOTE:
The unit will be automatically connected with the last connected Bluetooth device if their
Bluetooth function are both activated and they are in working range.
AUX IN OPERATION
Through the unit you can listen the sound from a connected external audio player (such
as MP3 player, tablet, cell phone, laptop).
1. Plug one end of the 3.5 mm Stereo Headphone Cable into the AUX in jack (11).
2. Plug the other end of the 3.5 mm Stereo Headphone Cable into the headphone
jack or Aux Out jack on the external audio player.
3. Power on the unit as previously explained.
4. Press the MODE button (7) repeatedly, or press the AUX button (R3) on remote
control directly to switch to the AUX IN mode, the AUX IN lamp in MODE indicating
lamp set (2) will turn to Green.
5. Power on the connected external player and start playback as usual.
AUDIO SOURCE SWITCHING