English - 20 -
Problem: cubic zirconia , Sapphire is damaged.
Cause: You might have used the wrong chips or too little
foam.
Remedy: Use plastic-chips KX 10 and check the wa-
ter/compound mixture.
Problem: After dry polishing there is a lot of the, so called
“orange skin” on flat work-pieces.
Cause: The grinding-chips are too abrasive (rough), there-
fore the dry polishing media can not flatten the surface suf-
ficiently.
Remedy: Grind once more with KX 10 or dry-grind in the
Eco-mini „dry“
afterwards using H/1-100 walnut granule.
9. Technical problems and remedy
Problem: Machine makes squeaking noises.
Cause: The grinding chips are too small (small ones were
not removed) or work-
pieces are getting under-
neath the disc.
Remedy: Remove the disc
by removing the screw
which holds the disc in
place, with an allan key size 3. Remove the disc to clean
underneath and replace the disc. Always sieve out the
chips smaller than 3 mm.
