Battery charger for the PUMA T2 hand-held radio
Technical Manual
General information and safety recommendations
Page 12
OTE Proprietary Information
P/N: 779-0357/02
Revision 04
Position the battery charger far from heat sources and in such a way
as to guarantee its correct aeration as well as safe accessibility to the
network power supply outlet. Do not set objects on the battery
charger. Do not use the battery charger outside of the environments
for which it was specified (ex. use in indoor environments only).
Do not use the equipment if the power supply cable and/or the plug
are damaged.
Use only battery chargers recommended by the manufacturer and
follow the instructions reported in the manual to recharge the battery.
It is advisable to insert the battery pack into the battery charger slot
without the Puma T2 radio body.
However, when inserting the Puma T2 unit with the battery pack the
plastic septum must be removed and the radio must be kept switched
off during the whole charging process otherwise some internal
components can be damaged.
Do not use the battery charger in environments that have a potentially
explosive atmosphere (ex. fuel storage sites, filling stations, etc.).
The use of battery charger might generate sparks that could trigger
fires and/or explosions.
Install the battery charger following the instructions given in this
manual. The equipment must be installed in such a way that it
complies with the national regulations in effect.
Carry out the maintenance interventions on the battery charger
following the instructions given in this manual.
