Battery charger for the PUMA T2 hand-held radio
Technical Manual
General information and safety recommendations
Page 6
OTE Proprietary Information
P/N: 779-0357/02
Revision 04
1.3.2
BCU2-1500, BCU2-1500/B and BCU6-750 models
The BCU2-1500, BCU2-1500/B and BCU6-750 battery charger models are
suitable for charging NiCd, NiMh and even Li-Ion batteries. They automatically
detect the type of battery slotted in.
The BCU2-1500 battery charger is supplied by the power supply network voltage
(230 V) through a proper cable. In the BCU2-1500/B and BCU6-750 versions the
power supply voltage is manually adjustable (230 V / 115 V) by a switch located on
the rear side of equipment.
The BCU-1500 and BCU2-1500/B models have two charging slots while the
BCU6-750 has six charging slots; all the models are provided with their
corresponding light signalling panel.
The discharging button (S1), to be used with non Li-Ion batteries, works if the
battery is inserted into the upper slot.
The two charging slot battery charger is shown in fig. 1.4.
1.
Fast discharging button (S1)
2.
Light signalling panel
3.
Power supply cable
4.
Upper slot with removable separating septum in place
5.
Lower slot with removable separating septum in place
Fig. 1.4:
Two slot battery charger
3
1
4
5
2
