SERVICE JACK INSTRUCTIONS
• Study, understand, and follow all instructions before
operating this device.
• Wear ANSI Z87.1 and OSHA approved eye protection.
• Do not exceed rated capacity.
• Use only on a hard, level surface.
• Do not use blocks or extenders between the saddle
and the load being lifted. This could reduce the jack’s
stability and cause vehicle to fall.
• Support vehicle with appropriate means immediately
after lifting.
• Do not move or dolly the vehicle while it is on the jack.
• Lift only on areas of the vehicle as specified by the
vehicle manufacturer.
• No alterations shall be made to this product.
• Failure to heed these markings may result in personal
injury/property damage.
Safety Information
Shop Equipment Recommendations
As with any tool or piece of equipment, it is highly recommended
to follow all applicable safety guidelines pertaining to its
use. Appropriate Personal Protective Equipment as outlined
by OSHA and ANSI standards, include (but are not limited
to) safety glasses or face shields, protective gloves, hearing
protection and reinforced (or safety toe) footwear. While using
tools and equipment, ensure that you are clear of any moving
parts or potential pinch points. To ensure the continued safe
operation of tools and equipment, always follow manufacturer’s
recommended cleaning and lubrication schedules to prevent
foreign material build up.
The warnings and instructions discussed
in this manual cannot cover every situation,
Always work with a focus on safety.
3
