manualshive.com logo in svg

Otai Pluto Fisheye, User Manual

Share
Download
Otai Pluto Fisheye User Manual Download Page 70

End to End Ping

When  both the Pluto1  and Pluto2  are connected  to host computers,  both the end- computers can ping each others directly

 

 

  Open  the  terminal  window  in  the  computer  from  which  you  want  to  ping  the connected system.

   Enter the IP address of the PC which is associated with the link.
   Observe the latency associated with the link.

Link Stability

 For stability and high performance of the link it is also important that the both radio are very well aligned.

Please browse both devices with respective IP address and you will nd link status on the bottom of the page.

Parameters are :-
1)  Signal quality - Range 30-60%
2)  Signal level should be 50-70%

Please align the antenna horizontally & vertically at both the ends and achieve signal quality as per range mention above. 

always innovative

always innovative

Step-5

Parameter for Station

Summary of Contents for Pluto Fisheye


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands