Otai Pluto Fisheye, User Manual

Page: 29 / 89

always innovative
Wireless
Basic Setting
Wireless Channel
Sets the desired wireless channel from entire list.
Wireless Network Name (SSID)
The name of the wireless network. (should be same in AP & Station)
TX & RX Antenna Chains
TX Antenna Chain : This allows the user to select the antenna for MIMO 2x2 it should be 1+2 and in case of MIMO 1x1
it should be 1 or 1+2 default.
RX Antenna Chain : This allows the user to select the antenna for MIMO 2x2 it should be 1+2 and in case of MIMO 1x1
it should be 1 or 1+2 default.
ScanList
This is the list that client or station scans for searching the remote AP. If the unit is congured as AP and frequency
enabled is default then the scan list denes which frequencies the AP will check to the best for tuning.
Sensitivity Range (ACK Timing)
This value should be at least the same value like the distance to the access point in meters. It should not be less but
maybe 10% more.