FT100 Series Installation & Operation Manual
www.ot-systems.com
4
(2) Product Overview
2.1 Introduction
The FT100 Series products comprise of either single-mode or multi-mode fiber optic
transmitters and receivers catering for optical transmission of ONE forward (Tx
→
Rx) video
singal in one fiber. The products work at wavelength 1310nm or 1550nm with either a 9/125um or
62.5/125um fiber for single-mode or multi-mode transmission respectively.
A non-compressed 10-bit digital video transmission scheme is implemented which supports
multi-systems video in NTSC, PAL and SECAM formats. Time Division Multiplex (TDM)
technique is employed for digital transmission of forward video.
For the single-mode transmission, we also offer specifically designed products for long-haul
transmissions up to 60km. Their model names include a letter “L” in the suffix, e.g. FT100-SST
L
for Tx, FT100-SSR
L
for Rx, etc.
The FT100 Series units are available as standalone units, which can be mounted
horizontally or vertically wall-mounted on any fixtures. The standalone unit comes with an
external power adaptor FT-PA/12V, which can be powered by a local residential power supply
outlet.
The FT100 Series units are also available as plug-in cards installed in 19” rack-mount
chassis deployed in small, medium to large systems. Each plug-in card occupies one slot space
inside the rack-mount chassis. The rack mount chassis has to be ordered separately which is
integrated with a power supply unit for powering the installed card modules.
