FT100 Series Installation & Operation Manual
www.ot-systems.com
11
(6) Specifications
MODELS*
PARAMETERS
FT100-SST(R)SA
FT100-SST(R)
(Single-Mode)
FT100-SST(R)LSA
FT100-SST(R)L
(Single-Mode)
FT100-SMT(R)SA
FT100-SMT(R)
(Multi-Mode)
OPTICAL
No. of Fiber / Connector
1 / ST (or FC)
1 / ST (or FC)
1 / ST (or FC)
Wavelength
1310 nm
1550 nm
1310 nm
Optical Power Budget
17 dB
24 dB
23 dB
Max Distance
40 km
60 km
4 km
ELECTRICAL VIDEO
Channel / Connector
1 / BNC
System
PAL, NTSC, SECAM
Bandwidth
6.5 MHz
Input/Output Impedance
75 Ohm
Input/Output Level
1.0 Vp-p typical
Differential Gain
< 1% typical
Differential Phase
< 1
o
typical
SNR
>65dB
POWER
Power consumption
12VDC @ 3W
Power Supply
Standalone Unit: FT/PA12V DC Adaptor
Card module: Powered by FT-C18 chassis
Connector (Standalone unit)
2-pin Screw Terminal
PHYSICAL
Weight
Standalone unit: 0.56 kg Card module: 0.16 kg
Dimensions (W x H x D)
Standalone unit: 156 x 30.5 x 223 mm (MAX)
Card module: 148 x 20.4 x 213 mm (MAX)
ENVIRONMENTAL
Operating Temperature
-40
o
C ~ +75
o
C
Storage Temperature
-40
o
C ~ +85
o
C
Relative Humidity
0 ~ 95% non-condensing
MTBF
>100’000 Hours
*
If the optical connector is FC type, the suffix in the model number will be
“-
F
XX
”. Eg. FT100-
F
ST
