English-5
You can fill your steam generator during use. Simply remove the water tank (8) as
described above and add water as required. Do not fill past the MAX indicator mark on
the tank.
Your steam generator will beep twice and the power indicator light (9) will flash to let you
know that the water tank needs filling.
The smart features of the iron prevent you from creating steam in temperature settings
below . This is to ensure that delicate fabrics are protected from ironing with steam.
It is recommended that for harder to iron fabrics such as cotton and linen, steam should
be used when ironing.
Warning: When ironing delicate fabrics like nylons, acrylics and synthetics. Steam
should never be used.
1. Fill the water tank (8) with water.
2. Plug your steam generator into the mains supply and press the on (I) /off (O) button (9)
to switch your steam generator on.
3. Rotate the temperature control dial (5) to set the pointer to between the setting and
the maximum heat (MAX) setting.
4. The temperature indicator light (2) will pulse as your steam generator heats up. When
the temperature indicator light turns solid your steam generator is ready to use.
5. With the soleplate in contact with the garment, press the steam trigger (4) for a couple
of seconds. It is not necessary to hold the trigger down continuously as steam will still
be emitted from the soleplate for a short time after the trigger has been released. If
more steam is required, press the steam trigger again.
6. To operate the steam boost function, double-click the steam trigger quickly. The iron
will generate a highly concentrated steam boost for a short period of time.
Always release the steam trigger and allow any residual steam to be released before
replacing the iron on its stand.
FILLING DURING USE
STEAM IRONING
