7
If the Unit Stops Working:
Fuse/Overload Protection – The motor is designed to protect itself from
overheating. When necessary, the motor will turn itself off.
1. Turn control knob to “Off” and unplug from the electrical outlet
2. Remove jug from base and free blade of any obstructions
3. Press external resettable fuse button on the bottom of the base
4. Wait 30-45 minutes for the unit to cool
If the warning light flashes and the motor will not run with the jug in place, the unit
has not cooled sufficiently. Turn the control knob to “Off” and wait another 10-20
minutes before trying again.
Caring for Your Product
Cleaning
Base: First turn the control to “Off” and unplug the power cord. Then wash outside
surface with a damp soft cloth or sponge using mild soap and warm water. Never
immerse the motor base in water or other liquid.
Jug: Fill the container half full with warm water and add 2 drops of liquid soap.
Close the jug with the lid and filler cap. Turn Speed Dial to a “Low” speed and then
increase to “High”. Run for 30-60 seconds. Turn the machine OFF, rinse the jug out
with running water then dry.
Lid & Filler cap: Separate the 2 pieces and wash in warm soapy water. Rinse clean
under running water, then dry.
NOTE - Do not put lid, filler cap or jug in the dishwasher.
Storing
After cleaning, store with lid not closed completely to allow air to circulate and
prevent container odours.
WARNING: Never put the jug or any other parts in a microwave.
Never store foods or drinks in the jug.
Summary of Contents for OPB9000
Page 5: ...4 4 5 6 7 8 1 2 3...