5
A
E
C
B
D
UNDERSTANDING THE PRODUCT CONTROL PANEL
A.
Speed Dial
– Turn dial clockwise to choose from manual speed settings from
“Low” to “High”. Once you select a speed, the blender will run until you turn it
back to “Off.”
B.
Programmed Settings
– In order to activate the programmed buttons, first turn
the speed dial counter-clockwise to the Programmed/Pulse Setting. Then select
the programmed button you would like to use. They have been developed for
optimal use when blending those types of foods.
Smoothie:
10 seconds to ramp up to “Medium”, 20 seconds on “High”.
Soup:
20 second ramp up to “Medium”, 5 minutes on “High”.
Dips/Spreads:
2 (10-second) pulses at “Medium-Low”, 30 seconds on “High”.
NOTE
– if you would like to stop the blender in the middle of a programmed
cycle, simply press any button.
C.
Pulse
– Turn the speed dial counter-clockwise to the Programmed/Pulse Setting.
Then press the “Pulse” button for the desired time.
D.
LED Lights
– The lights around the selected programmed buttons will pulse
when the unit is operating in that mode.
E.
Flashing Light
– When speed dial is turned to the Programmed/Pulse setting,
the Pulse button light will flash red to indicate the unit is ready to operate.
WARNING: Flashing light indicates ready to operate. Do not touch the blade.
Summary of Contents for OPB9000
Page 5: ...4 4 5 6 7 8 1 2 3...
